Choose a state
North Carolina Building Contractor (2023-04-07)
This classification covers all building construction activity including: commercial, industrial, institutional, and all residential building construction; parking decks; all site work, grading and paving of parking lots, driveways, sidewalks, curbs, gutters, and water and wastewater systems which are ancillary to the aforementioned structures and improvements; and work done under the specialty classifications of S(Concrete Construction), S(Insulation), S(Interior Construction), S(Marine Construction), S(Masonry Construction), S(Roofing), S(Metal Erection), S(Swimming Pools), and S(Asbestos).
Questions - 90
Minimum Passing Score of 70%
Time Allowed - 200 Minutes
The reference material listed below was used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
Click Here to View the Candidate Information Bulletin
Closed Book These books are for pre-test study only and are not available for use during the test.
In Stock These books are currently in stock.
Out of Stock These books are currently out of stock.
-
Closed Book In Stock
Technical Digest No. 9 - Handling and Erection of Steel Joists and Joist Girders
3rd Edition
Publication Year: March 2006
$57.00
This updated Technical Digest contains a thorough coverage of the proper handling and erection procedures to be employed in the field to make certain that SJI joist products are not damaged, that they perform as specified, and above all, to ensure the safety of the erectors. The digest includes descriptions of the standard products: K-Series joists, LH/DLH-Series joists, Joist Girders and now CJ-Series joists, how joist products are prepared, tagged, loaded and shipped from the joist manufacturer’s plant, how they are to be unloaded and stored at the job site, how the joist products are to be erected including bridging, and field inspection. Other topics covered in the digest are penalized erection and common field issues. This edition contains information related to the newest standard joist product, the CJ-Series joists that were introduced in 2007. It also includes updated information on Bridging in Chapter 8 as well as some additional topics added to the list of Miscellaneous Topics - Common Field Issues in Chapter 9. General contractors, steel erectors, inspectors, and building officials would most benefit from this Technical Digest. Engineers and Architects would also benefit from the information contained in the digest if part of their responsibilities is to oversee joist and Joist Girder projects under construction.
-
Closed Book In Stock
Pipe and Excavation Contracting 2011
Publication Year: 2011
$50.00
This popular manual has been updated and improved to bring it more current with modern earth moving and trenching equipment, refined excavation techniques, stricter safety rules, and improved materials. Here you’ll find how to enter and succeed in the underground utility business. Includes hands-on instructions for operating the equipment and doing the trenching, pipe laying and connecting work and answers to what causes so many skilled equipment operators and pipe layers to fail when they try to start their own business.
-
-
Closed Book In Stock
North Carolina One-Call Center Excavation Manual
$0.00
*THIS BOOK IS NO LONGER IN PRINT AND IS NO LONGER AVAILABLE TO PURCHASE
*PLEASE CONTACT US FOR MORE INFORMATION*
-
Closed Book Out of Stock
North Carolina General Statutes Chapter 113A, Article 4 Sedimentation Pollution Control Act of 1973
$15.00
-
-
Open Book In Stock
North Carolina Occupational Safety and Health Standards for the Construction Industry
$52.00
-
Closed Book Out of Stock
North Carolina Administrative Code Title 15A, Chapter 4 Sedimentation Control
$15.00
-
Open Book In Stock
North Carolina State Building Code, 2018 Edition
$140.00
This is a fully integrated code based on the 2015 International Building Code.
*IN STOCK*
-
Open Book In Stock
North Carolina State Building Code Administrative Code and Policies, 2018 Edition
Publication Year: 2018
$48.00
Includes all of the administrative codes and policies of the 2015 North Carolina State Building Codes.
*CURRENTLY IN STOCK*
-
Closed Book In Stock
Training Certification of Field Personnel For Unbonded Post Tensioning
3rd Edition
Publication Year: 2003
$95.00
This instructional manual has been prepared by the Post-Tensioning Institute's Committee for Training and Certification of Field Personnel for Unbonded Post-Tensioning soley as a recommended general guide and assistance to the placement, installation and inspection of unbonded single strand post-tensioning systems, the operation of stressing equipment, and accessories.
-
Closed Book In Stock
Carpentry and Building Construction, 2016 Student Edition
Publication Year: 2016
$105.00
**IN STOCK**
Carpentry & Building Construction is a comprehensive carpentry program that focuses on residential construction with many procedures also applying to light commercial construction. The informative text provides detailed, heavily illustrated information about materials, tools, and processes, with many step-by-step procedures. -
Open Book In Stock
ACI 318-14 Building Code Requirements for Structural Concrete & Commentary
Publication Year: 2014
$310.00
The “Building Code Requirements for Structural Concrete” (“Code”) provides minimum requirements for the materials, design, and detailing of structural concrete buildings and, where applicable, nonbuilding structures. This Code addresses structural systems, members, and connections, including cast-in-place, precast, plain, nonprestressed, prestressed, and composite construction. Among the subjects covered are: design and construction for strength, serviceability, and durability; load combinations, load factors, and strength reduction factors; structural analysis methods; deflection limits; mechanical and adhesive anchoring to concrete; development and splicing of reinforcement; construction document information; field inspection and testing; and methods to evaluate the strength of existing structures.
-
Open Book In Stock
ACI 530-13 Building Code Requirements For Masonry Structures
$160.00
The Code covers the design and construction of masonry structures while the Specification is concerned with minimum construction requirements for masonry in structures. Some of the topics covered in the Code are: definitions, contract documents; quality assurance; materials; placement of embedded items; analysis and design; strength and serviceability; flexural and axial loads; shear; details and development of reinforcement; walls; columns; pilasters; beams and lintels; seismic design requirements; glass unit masonry; veneers; and autoclaved aerated concrete masonry. An empirical design method and a prescriptive method applicable to buildings meeting specific location and construction criteria are also included.The Specification covers subjects such as quality assurance requirements for materials; the placing, bonding and anchoring of masonry; and the placement of grout and of reinforcement. This Specification is meant to be modified and referenced in the Project Manual. The Code is written as a legal document and the Specification as a master specification required by the Code.
-
Closed Book In Stock
Design and Control of Concrete Mixtures 17th Edition
Publication Year: 2021
17th Edition
$135.00
Design and Control of Concrete Mixtures, 17th Edition is the definitive guide for engineers, contractors, producers, instructors, and students. This new edition reflects the latest advances in concrete technology and highlights concrete’s contribution to sustainability. Provides guidance on all aspects of concrete technology from selection of suitable materials to designing and proportioning a concrete mixture.
Backed by over 100 years of research by the Portland Cement Association and other industry groups.
Reflects the latest guidance on standards, specifications, and test methods of ASTM International (ASTM), the American Association of State Highway and Transportation Officials (AASHTO), and the American Concrete Institute (ACI).
Presenting a 40% increase in new information, including two new chapters on imperfections in concrete and innovations in concrete technology.
-
Closed Book In Stock
SDI (Manual of Construction with Steel Deck) Edition 3
Publication Year: 2017
3RD Edition
$50.00
The new Third Edition of the Steel Deck Institute Manual of Construction with Steel Deck (MOC3) continues the tradition established by earlier editions to provide information necessary for the proper field usage of steel deck. This edition is reformatted for easier use with updated references, including those for the SDI QA/QC Standard for Quality Control and Quality Assurance for Installation of Steel Deck.
-
Open Book In Stock
ANSI A117.1 Accessible and Usable Buildings and Facilities 2017 Turbo Tabs
$22.00
Flip through the ICC A117.1-2017 Accessible and Usable Buildings and Facilities Standard and find frequently used sections fast! You'll be surprised how easy it is to find what you are looking for. These tabs were created by industry experts who carefully identified the most referenced sections in the standard. Clear plastic, self-adhesive tabs that have the key sections of the standard printed on them in an easy-to-read format.
-
Open Book In Stock
ANSI A117.1 Accessible and Usable Buildings and Facilities 2017
$60.00
This easy-to-use format includes the full text of ICC A117.1-2017: Standard for Accessible and Usable Buildings and Facilities, including tables and figures, followed by the corresponding commentary for each section. The commentary and accompanying figures explain the background and intent of the requirements and suggest the most effective method of application. Potential consequences of not following the provisions of the standard are also discussed.
The ICC A117.1-2017 standard provides the technical requirements to make sites, facilities, buildings and elements accessible to and usable by people with physical disabilities. The intent of the standard is to allow a person with a physical disability to independently get to, enter, and use a site, facility, building, or element. The commentary explains how the provisions of the standard make the elements accessible and is a must-have reference for facility professionals, building owners, architects, designers, and code officials who want to stay current on the requirements of A117.1.
Besides addressing each section of the standard, the 2017 edition of the commentary addresses many items revised or added since the 2009 edition, including:
For new buildings and additions, enhanced dimensions for the clear floor space, turning space and the accessible route. This will affect the space provided at elements and will increase the maneuverability within such spaces for users of powered wheelchairs and scooters.
Provisions incorporating many of the latest criteria for public rights of way provisions for curb cuts, blended transitions, detectable warnings, diagonal parking and street parking (PROWAG).
Provision to improve safety for an accessible route traversing a parking lot.
Provisions to facilitate charging of powered wheelchairs where they will be parked for duration, such as in accessible hotel rooms and at some wheelchair seating in assembly spaces.
Provisions addressing accessibility at electric vehicle charging stations.
Provisions for water bottle filling stations.
Provisions that address spaces for sign language interpreter stations and sign language video booths.
A new section addressing classroom acoustics that aims to improve acoustics in the rooms and to reduce the intrusion of noises from outside the classroom, thereby enhancing the learning environment.
This publication provides an excellent resource for anyone who wants a better understanding of ICC A117.1-2017 and how its provisions make buildings and facilities accessible and usable. -
Open Book In Stock
Sports Fields: Design, Construction, and Maintenance 3rd Edition
$140.00
The updated Third Edition of Sports Fields: Design, Construction, and Maintenance is a comprehensive reference for professionals who are responsible for the design, construction, renovation, and maintenance of athletic facilities. This book contains illustrative examples of specific design elements of the most popular sports facilities. This Third Edition contains new chapters on safety, public relations, and professionalism for future sports field managers, as well as fresh drawings and photos that highlight innovative field layout, grading, irrigation, and drainage. All-new case studies review best practices and techniques for sports fields ranging from youth and high school fields to fields that are designed for professional athletes. This text is also an ideal resource for anyone studying for Sports Field Manager Certification (offered by STMA).
Features new case studies that include design and management best practices for all levels and types of sports facilities
Offers new chapters on safety, public relations, and professionalism for future sports field managers
Includes new illustrations and photos of innovative field layout, grading, irrigation, and drainage
Contains the most recent information on sand-based field systems and synthetic turf
Presents discussions of a range of fields including baseball, softball, football, soccer, lacrosse, field hockey, tennis, and track and field
Sports Fields: Design, Construction, and Maintenance, Third Edition is a blueprint for field managers, designers, and builders for successful sports field projects. -
Closed Book In Stock
Roofing Construction & Estimating Revised
$52.00
The step-by-step, hands-on guide to any type of roofing on residential and commercial buildings. Covers everything from underlayment to shingles to roof coatings. Includes tips and tried-and-tested installation methods. Loaded with job-site photos, sketches and diagrams to make the procedures clear. The result: Your clients get an attractive, durable roof that provides top value, nearly eliminates callbacks and builds your reputation as a knowledgeable roofing pro.
-
Closed Book In Stock
Modern Masonry: Brick, Block, Stone 9th Edition
Publication Year: 2020
$125.00
Modern Masonry: Brick, Block, Stone provides a broad understanding of the properties and applications of masonry materials. It begins with coverage on careers to help students learn about the industry. It then progresses to teaching safe and proper procedures for working with brick, block, and stone. Coverage of concrete form construction and flatwork is also included. Green features address specific topics relating to masonry’s impact on the environment.
-
Open Book In Stock
NASCLA Contractors Guide to Business, Law and Project Management, North Carolina, 9th Edition
Publication Year: 2021
9th Edition
$100.00
The NASCLA Contractors Guide to Business, Law and Project Management is organized into 3 sections.
Part 1 focuses on business planning and start up. This section will help you formulate a business plan, choose a business structure, understand licensing and insurance requirements and gain basic management and marketing skills.
Part 2 is centered on fundamentals that you will need to operate a successful construction business. This section will cover estimating, contract management, scheduling, project management, safety and environmental responsibilities and building good relationships with employees, subcontractors and customers.
Part 3 gives you valuable information for running the administrative function of your business. Financial management, tax basics and lien laws are covered. Effective management of these areas of business is vital and can cause you serious problems if you do not give them the proper attention.